Sunday 21 February 2016

Shop Press.

Take one 20 quid hydraulic jack


...add some steel from the scrapyard


and you have the ingredients of a shop press.

First step was cutting the rectangular box section I will be using for the cross pieces in half.

Next step was to remove the bits of plate welded to the box sections that I will be using for the uprights. This killed my grinder.


So I turned to drilling the holes in the cross pieces.



By doing this on the mill I know that they are exactly 650mm apart (+/- .01mm) this is possibly a bit of overkill.

So this is where I got to...


I reckon I've got enough scrap about the place to finish with little extra cost.

No comments:

Post a Comment